Tourneo / Transit Custom with Tailgate Bike Carrier Production date 2012 Dec. until 2023 Jul.

Equipped with a Paulchen bicycle carrier for Your Ford Tourneo / Transit Custom nothing can stop Your great trip. Comprehensive accessories adapt the Paulchen to Your individual needs. A quick and easy fastening and safe transport is ensured.

Product features

• The bicycle carrier and the bike holders are perfectly suitable for e-bikes. The max. load amounts up to 70 Kg. This corresponds to 4 bicycles or 2 E-Bikes.
• You have the possibility to extend the carrier for up to 4 bicycles. Please use extension type B.
• The platform of the carrier is adjustable. Due to the position of the rear lights of Your car You will need an additional rear light bar with integrated licence plate holder.
• The platform can be folded to the rack. Therefor Your car won't be elongated and searching for a parking space will be no problem.
• The vehicle-specific parts are equipped with the Paulchen paint protection.
• For the mounting of the carrier You will need two 10 mm and one 13 mm open-ended or socket wrench. There is no need to drill holes in the bodywork.
• The access to the boot is guaranteed with the carrier mounted. The rear wiper can still be used.
• This bike carrier is suitable for Ford Tourneo / Transit Custom YOM 2012 Dec. until 2023 July. It must not be used universally for other car models. An adaptation to another car model is possible. Here You find information to the Paulchen System and to the carrier conversion.

Optional accessories

We supply a Comprehensive range of accessories. For this car model You can use the following accessories.

• 

  Rear light bar

  Due to the position of the rear lights of the car, the bicycles have to be lifted very high. The adjustable platform of the carrier allows a much lower and comfortable position. However You will have to complement a rear light bar, which is available in different variations ⇗. With our new LED lamps, no additional electrical components are required. Here You can find information about the connection ⇗ of the lightbar to your car.

  Light bar

  

  Version L1

  For mounting at the platform, parallel connected to the original lights of Your vehicle.* The plug is simply placed outside through the boot seal when needed.

  ---

  

  Version L2

  For mounting at the basic rack, parallel connected to the original lights of Your vehicle.* The plug is simply placed outside through the boot seal when needed.

  ---

  

  Version L2B

  For mounting at the basic rack with a 13-pin plug to connect to a tow bar socket.

  ---

  *Should there occur problems with the board computer, because Your car has a BUS–system (CAN-BUS, LIN-BUS etc.) or Your car has rear lights with LED technology, You will have to use the Paulchen controller.
  More about our Light bar
• 

  Carrier theft protection

  The theft protection secures the carrier to the tailgate of Your car.
• 

  Tailgate positioner

  Mostly the gas pressure absorbers won't hold the additional weight of the carrier. We recommend to use the 'Heckklappenaufsteller' which locks the opened tailgate in place.
  * The 'Heckklappenaufsteller' may only be used with an empty carrier.
• 

  Wall brackets

  The wall mount is used to store the carrier in the garage or basement. The wall mount can also be used as a space saving bicycle stand.
• A German manual is included with delivery.